Analysis of biofilm formation by Candida albicans in different types of orthodontic fixed appliances and devices / Análise da formação de biofilme por Candida albicans em diferentes tipos de aparelhos e dispositivos ortodônticos fixos

Objective: in this study, biofilm formation by Candida albicans in fixed orthodontic appliances was evaluated. Material and Methods: a total of 300 conventional metal brackets (MC), ceramic (CB), self-ligation (SLB), nickel-titanium (NiTi), and nickel-chromium (NiCr) wires, and ligatures types were organized into thirty groups (n=10). To induce biofilm formation, brackets, wires, and ligatures were joined, sterilized, placed in 24-well plates, contaminated with standardized suspensions of C. albicans (107 cells/mL), and incubated at 37 °C for 48 h with shaking. The biofilms formed were detached using an ultrasonic homogenizer, and suspensions were serially diluted and plated on Sabouraud dextrose agar to determine colony-forming units per mL. Scanning electron microscopy was performed before and after the biofilm formation. Results: lower amount of biofilm formation was observed in the MC group than in the CB and SLB groups (p<0.0001). SLB and CB showed similar biofilm formation rates (p=0.855). In general, the cross-sectional wires .018"x.025" showed higher biofilm formation when associated with the three types of brackets. When brackets, wires, and ligatures were associated, the sets with NiCr wires and SSL ligatures with MC brackets (p=0.0008) and CB (p=0.0003) showed higher biofilm formation. Conclusion: thus, brackets of MC with NiTi and NiCr wires showed lower biofilm formation, regardless of the ligature and cross-sectional or gauge of the wire and, MC and CB brackets with NiCr wires and SSL ligatures were more likely to accumulate biofilms (AU)

Objetivo: neste estudo, a formação de biofilme por Candida albicans em aparelhos ortodônticos fixos foi avaliada. Material e Métodos: um total de 300 bráquetes metálicos convencionais (MC), cerâmicos (CB), autoligados (SLB), com fios de níquel-titânio (NiTi) e níquel-cromo (NiCr) e tipos de ligaduras foram organizados em trinta grupos (n=10). Bráquetes, fios e ligaduras foram unidos, esterilizados, colocados em placas de 24 poços, contaminados com suspensões padronizadas de C. albicans (107 células/mL) e incubados a 37°C por 48 h para a formação de biofilmes. Os biofilmes formados foram rompidos por meio de um homogeneizador ultrassônico e suspensões foram diluídas e semeadas em ágar Sabouraud-dextrose para determinar as unidades formadoras de colônias por mL. A microscopia eletrônica de varredura foi realizada antes e após a formação do biofilme. Resultados: foi observada menor formação de biofilme no grupo MC em comparação aos grupos CB e SLB (p<0,0001). A formação de biofilme foi semelhante nos grupos SLB e CB (p=0,855). Em geral, os fios de seção transversal .018"x.025" apresentaram maior formação de biofilme quando associados aos três tipos de bráquetes. Os conjuntos com fios de NiCr e ligaduras SSL com bráquetes MC (p=0,0008) e CB (p=0,0003) apresentaram maior formação de biofilme. Conclusão: bráquetes MC com fios de NiTi e NiCr apresentaram menor formação de biofilme, independente da ligadura e secção transversal ou bitola do fio e, braquetes MC e CB com fios de NiCr e ligaduras SSL foram mais propensos a acumular biofilmes.(AU)

Efficacy, safety, and potential industry bias in using deoxycholic acid for submental fat reduction - A systematic review and meta-analysis of randomized clinical trials

Abstract Lipolytic substance injections to reduce localized fat have been extensively used because it is a low-invasive method. This review aimed to evaluate the efficacy and safety of deoxycholic acid in submental fat reduction compared to a placebo and investigate the potential industry sponsorship bias in the results of randomized clinical trials on this topic. Ten electronic databases were extensively searched for randomized clinical trials without restriction on language and year of publication. Two reviewers extracted the data and assessed the individual risk of bias in the studies with the RoB 2.0 tool. The industry sponsorship bias was evaluated according to citations in the articles regarding industry funding/sponsorship throughout the texts. Fixed and random effects meta-analyses were performed, and the results were reported in Risk Ratio (RR) at a 95% Confidence Interval (95% CI). The initial search provided 5756 results, of which only five were included. Only two studies had a low risk of bias. All studies showed a potential industry bias. The meta-analysis showed that patients treated with deoxycholic acid had significant positive results for all efficacy outcomes and a higher risk of fibrosis, pain, erythema, numbness, swelling, edema, pruritus, nodules, headache, and paresthesia. The low to moderate certainty of evidence found allows concluding that deoxycholic acid is effective in submental fat reduction, causing well-tolerated adverse effects. However, all eligible studies showed a potential industry bias.

The endocannabinoid system and orofacial pains: updates and perspectives / O sistema endocanabinoide e as dores orofaciais: atualidades e perspectivas

ABSTRACT BACKGROUND AND OBJECTIVES: Since the relatively recent discovery of the endocannabinoid system (ECS) and its fundamental role in regulating other systems, the subject has aroused interest in all areas of health, including Dentistry. Among the possible uses and benefits of cannabinoids are their performance in pain and its predisposing or perpetuating factors, such as bruxism and sleep disorders. Although the literature is still scarce, the mechanisms of action and satisfactory results of cannabinoids and other cannabis derivatives in these situations already allow their safe prescription. The objective of this study was to verify the current evidence on the use of cannabis derivatives in orofacial pain (OFP), reviewing what is known, to date, about the ECS and the prospects for its use with support and criteria. CONTENTS: This research carried out a brief review of the cannabis plant history, addressing issues such as prejudice, prohibitions and interests, as well as its therapeutic use. Then, a review on ECS and its mechanisms of interest in OFP was presented. Next, the products derived from the plant and their effects, indications, contraindications, adverse effects, drug interactions, peculiarities and perspectives were discussed. CONCLUSION: The more knowledge is gained about the ECS and the therapeutic benefits of cannabis components and derivatives, the greater the conviction that a new therapeutic frontier has indeed emerged. The growing number of good outcomes, including cases of OFP, obtained through well-conducted studies, brings a mixture of satisfaction and excitement. No therapy will achieve good results if it does not start from an accurate diagnosis. Thus, it is of the utmost importance to know the ECS, the products and derivatives of the plant, the synthetic cannabinoids, their indications and effects. New studies are necessary and, at this moment, it can be said that the perspectives are very good and a new and challenging horizon is emerging.

RESUMO JUSTIFICATIVA E OBJETIVOS: Desde a descoberta relativamente recente do sistema endocanabinoide (SEC) e seu papel fundamental da regulação de outros sistemas, o assunto tem despertado interesse de todas as áreas da saúde, incluindo-se a Odontologia. Dentre as possíveis utilizações e benefícios dos canabinoides, está sua atuação na dor e seus fatores predisponentes ou perpetuadores, como o bruxismo e os distúrbios do sono. Embora a literatura seja ainda escassa, os mecanismos de ação e resultados satisfatórios dos canabinoides e demais derivados da cannabis nessas situações já permitem sua prescrição com segurança. O objetivo deste estudo foi verificar as atuais evidências sobre a utilização de derivados da cannabis nas dores orofaciais (DOFs), revisando o que se sabe, até o momento, sobre o SEC e as perspectivas de sua utilização com respaldo e critério. CONTEÚDO: Esta pesquisa realizou uma breve revisão da história da planta cannabis, abordando temas como preconceito, proibições e interesses, além de sua utilização terapêutica. Em seguida, foi apresentada uma revisão sobre o SEC e seus mecanismos de interesse na DOF. Na sequência, foram discutidos os produtos derivados da planta e seus efeitos, indicações, contraindicações, efeitos adversos, interações farmacológicas, peculiaridades e perspectivas. CONCLUSÃO: Quanto mais são adquiridos conhecimentos sobre o SEC e os benefícios terapêuticos dos componentes e derivados da cannabis, mais há um convencimento de que surgiu, de fato, uma nova fronteira terapêutica. O número crescente de bons desfechos, incluindo casos de DOF, obtidos através de estudos bem conduzidos, traz um misto de satisfação e empolgação. Nenhuma terapia obterá bons resultados se não partir de um diagnóstico preciso. Assim, é de suma importância que se conheça o SEC, os produtos e derivados da planta, os canabinoides sintéticos, suas indicações e efeitos. Novos estudos são necessários e, nesse momento, pode-se afirmar que as perspectivas são muito boas e um novo e desafiador horizonte está despontando.

Psychological Factors in Temporomandibular Disorders Patients during COVID-19 Pandemic: A Cross-Sectional Study

Abstract Objective: To assess the influence of the COVID-19 pandemic on levels of anxiety, stress, and orofacial pain in individuals with and without TMD. Material and Methods: In this cross-sectional study, the participants were divided into two groups (n=10, each) experimental group (EG) TMD patients and control group (CG), without TMD. The presence of TMD was confirmed using the RDC/TMD. The Beck Anxiety Scale (BAI), Perceived Stress Scale (PSS), and Oral Analog Scale were used for assessment. The Beck Anxiety Scale is composed of 21 multiple-choice questions describing symptoms of anxiety, while the PSS is a measure that evaluates life situations as stressful. An Oral Analogue Scale was applied to each individual to quantify orofacial pain, with 0 (zero) without pain and 10 (ten) being the worst pain ever felt. The comparison between groups was performed using the Mann-Whitney test. Logistic regression was used to verify TMD dependence in relation to BAI and PSS-10. Quantitative variables were correlated with each other by Pearson's correlation coefficient. The level of significance considered for all tests was 5%. Results: The association was statistically significant (p≤0.05) for BAI and PSS with a TMD. Conclusion: Although the COVID 19 pandemic has had a psychological impact on the general population, patients with TMD have higher levels of anxiety and stress than the control group.

Influence of dental erosion on shear bond strength of ceramic brackets bonded with two different adhesive systems: an in vitro study

This study aimed to analyze the shear bond strength (SBS) of ceramic orthodontic brackets bonded with two different adhesive systems to intact and eroded teeth. Ceramic brackets were bonded to 72 bovine central incisors divided into four groups, defined by two study factors: enamel condition (control group, kept in artificial saliva; and experimental group, eroded by using immersion cycles in Coke™ for 90 seconds, every six hours for five days), and adhesive system type (Transbond™ XT or Transbond™ Plus Color Change). Polycrystalline ceramic brackets were adhesively fixed on all specimens using the same light curing protocol. SBS was tested using 0.5 mm/min and the failure mode was classified. SBS data was analyzed using two-way ANOVA followed by Tukey test. The adhesive remnant index (ARI) scores were analyzed using Kruskal-Wallis test with Dunn's post-hoc pairwise comparison (α=0.05). Percentages of ARI scores between the groups were compared by Fisher's exact test. Spearman's correlation coefficient was applied to investigate the correlation between ARI scores and SBS values. Only the adhesive system factor had significant effect on SBS (p=0.014), Transbond™ Plus Color Change showing higher values. No significance was found for enamel condition (p=0.665) or the interaction between adhesive system and enamel condition (p=0.055). ARI scores frequencies differed between groups (p<0.001). The median ARI scores were statistically different for most comparisons among the groups. However, no significant correlation was found between ARI scores and SBS. In conclusion, the type of adhesive system affected the SBS of ceramic brackets to dental enamel, but the enamel condition, intact or eroded, had no significant effect. There was no correlation between ARI scores and SBS values, although eroded enamel tended to retain more adhesive after bracket removal.

Preemptive use of intravenous ibuprofen to reduce postoperative pain after lower third molar surgery: a systematic review of randomized controlled trials

This study aimed to systematically review the literature to assess the effect of preemptive intravenous ibuprofen on pain reduction after lower third molar surgery. Nine databases (PubMed, Scopus, LILACS, SciELO, Embase, Web of Science, Cochrane, Open Gray, and Open Thesis) were used as sources of research, including "grey literature." The protocol was registered in PROSPERO. Only randomized clinical trials evaluating the effects of preemptive intravenous ibuprofen on pain during and immediately after the extraction of lower third molars were included, without restrictions of year and language. Two reviewers independently performed the study selection, data extraction, and assessment of the risk of bias. The "Joanna Briggs Institute for Randomized Controlled Trials" tool was used to assess the risk of bias. Each study was categorized according to the percentage of positive responses to the questions corresponding to the assessment instrument. The results were measured narratively/descriptively. The initial search resulted in 3,257 records, of which only three studies (n=150 participants) met the eligibility criteria and were included in the qualitative analysis. All studies were published in 2019. The risk of bias ranged from low to moderate. Two studies found significant pain reduction within 48 h after the procedure. In conclusion, the use of preemptive intravenous ibuprofen for extracting third molars reduces pain and analgesic consumption after the surgical procedure.

Toxicity and effect of whitening toothpastes on enamel surface

Abstract This in vitro study evaluated the biocompatibility and abrasivity of whitening and conventional toothpastes. Samples of conventional (non-whitening) - Edel White Infant (EWI) - and whitening toothpastes - Edel White Whitening (EWW), Edel White CAREFORTE (EWC), Colgate Total 12 Ò Professional (C), and Oral-B Whitening (OB) - were dissolved in culture medium (0.2 g sample weight per mL). Human gingival fibroblasts (hGF) were placed in contact with different dilutions of culture media that had been previously exposed to these toothpastes. Cytotoxicity was then assessed using the methyl tetrazolium test (MTT) and the cell survival rate was determined. Genotoxicity was assessed by the micronucleus test (MNT) and the number of micronuclei was determined before and after exposure to the toothpaste solutions. The enamel surface roughness was evaluated in specimens of bovine teeth (n = 10 per group) before and after 10,000 brushing cycles, using the investigated toothpastes. The results were statistically analyzed using the Mann-Whitney U test and two-way ANOVA (p < 0.05). According to the MTT assay, EWW and OB presented significant cytotoxicity (p < 0.01), but no genotoxic (MNT) effects (p > 0.05). C toothpaste was statistically significantly abrasive to the enamel surface (p < 0.01). The findings of this study may be helpful for individualized selection of commercial toothpastes, as some whitening toothpastes present significant cytotoxicity and conventional toothpaste cause significant surface changes.

Os efeitos da Punica granatum L. em diferentes concentrações sobre duas linhagens celulares: estudo in vitro / The effects of Punica granatum L. at different concentrations on two cell lines: in vitro study

Introdução: A Punica granatum L. (PG), utilizada como medicamento fitoterápico, apresenta propriedades terapêuticas, anti-inflamatórias e antioxidante. Embora diversos estudos já tenham sido realizados com este fitoterápico, seus possíveis efeitos citotóxicos nos tecidos humanos ainda não são claros. Objetivo: Avaliar a citotoxicidade da PG por meio de cultura celular com duas linhagens: fibroblastos humanos de mucosa oral (FLM) e células de carcinoma epidermoide oral humano (KB). Material e método: As células foram submetidas ao teste de viabilidade celular por 24 horas nas concentrações da PG 1%, 0,50%, 0,25%, 0,125%, 0,062% e 0,031%, e aos testes de citotoxicidade celular em 4 horas, 1, 3, 5 e 7 dias, em diferentes concentrações, realizados em triplicata. Foi utilizado um controle negativo (Triton 1%) e um controle positivo sem o extrato de PG. Os dados obtidos foram submetidos à ANOVA (p < 0,05). Resultado: Foi possível observar que o extrato da PG possui efeitos inibitórios, apresentando-se maior nas células KB em relação às FLM. Os testes de citotoxicidade e viabilidade mostraram inibição e morte das células KB e FLM nas concentrações 1%, 0,50% e 0,25%. Conclusão: O efeito inibitório da PG foi dose-dependentes, mostrando-se maior nas células KB em relação às FLM.

Introduction: Punica granatum L. (PG), used as a herbal medicine, has therapeutic, anti-inflammatory and antioxidant properties, although several studies have already been carried out with this herbal medicine, its possible cytotoxic effects on human tissues are still unclear. Objective: To evaluate the cytotoxicity of PG through cell culture with two strains: human oral mucosa fibroblasts (LFM) and human oral squamous cell carcinoma (KB) cells. Material and method: The cells were submitted to the cell viability test for 24 hours in the concentrations of PG 1%, 0.50%, 0.25%, 0.125%, 0.062% and 0.031% and the cell cytotoxicity tests in 4 hours, 1, 3, 5 and 7 days in different concentrations, performed in triplicate. A negative control (Triton 1%) and a positive control without the PG extract were used. The data obtained were submitted to ANOVA (p <0.05). Result: it was possible to observe that the PG extract has inhibitory effects, being higher in KB cells in relation to LFM. The cytotoxicity and viability tests showed inhibition and death of KB and FLM cells at concentrations of 1%, 0.50% and 0.25%. Conclusion: The inhibitory effect of PG was dose dependent, showing itself to be greater in KB cells compared to LMB.

Comparação da exotermia de resinas durante a restauração provisória direta / Comparison of resin exotherm during direct provisional restoration

Resumo Introdução As resinas de polimetilmetacrilato e as bisacrílicas são materiais amplamente utilizados para a confecção de restaurações provisórias; no entanto, ambas apresentam uma característica de exotermia durante a polimerização que deve ser investigada por causa de possíveis interferências no sucesso clínico. Objetivo Avaliar a variação de temperatura de polimerização da resina bisacrílica e de uma resina acrílica quimicamente ativada, em preparos classe V, pelo método direto. Material e método Para isso, vinte dentes incisivos inferiores bovinos foram divididos em dois grupos: RA (N=10) com dentes restaurados com resina acrílica e RB (N=10) com dentes restaurados com resina bisacrílica. As mensurações das variações térmicas foram realizadas através de termopares tipo J, ligados a um termômetro óptico, e analisadas por um computador equipado com o software específico. Os dados obtidos foram analisados e submetidos à análise de médias comparadas pelo teste de Tukey (significância de 5%). Resultado Foi possível observar que não houve diferença estatística significante entre ambos os grupos experimentais (p=0,0739), mesmo que aumento de temperatura de RA tenha apresentado média maior (0,52 °C) do que RB (0,44 °C). Conclusão Não existe diferença significativa experimental entre o calor emitido pela resina acrílica e pela resina bisacrílica durante seus processos de polimerização, não definindo a característica de escolha de uma destas para as restaurações provisórias diretas.

Abstract Introduction Polymethyl methacrylate and bis-acryl resins are materials widely used for temporary restorations, however, both have a characteristic of polymerization exotermia that should be investigated because of possible interferences in clinical success. Objective to evaluate the variation of the polymerization temperature of bis-acryl resin and a chemically activated acrylic resin in the temporary restoration by the direct method. Material and method Twenty bovine mandibular incisor teeth were divided into two groups: AR (N = 10) teeth restored with acrylic resin and BR (N = 10) teeth restored with bis-acryl resin. Measurements of thermal variations were performed using type J thermocouples, connected to an optical thermometer and analyzed by a computer equipped with specific software. The obtained data were analyzed and submitted to the analysis of means compared by Tukey test (significance of 5%). Result It was observed that there was no statistically significant difference between both experimental groups (p = 0.0739), even though AR temperature increase presented higher average (0.52ºC) than BR (0.44ºC). Conclusion There is no significant experimental difference between the heat emitted by acrylic resin and bis-acryl resin during their polymerization processes, not defining the factor that characterizes a choice of a material for temporary restorations.

Effect of two erosive protocols using acidic beverages on the shear bond strength of orthodontic brackets to bovine enamel

Abstract Objective: To assess the short-term effect of two in vitro erosive challenge protocols on the bond strength of metal orthodontic brackets on bovine enamel. Methods: Sixty bovine incisors were selected and randomly divided into six groups: AS7 (artificial saliva - 7 days, Control Group); CC7 (Coca-Cola™ - 7 days); LJ7 (lime juice - 7 days); AS30 (artificial saliva - 30 days, Control Group); CC30 (Coca-Cola™ - 30 days); LJ30 (lime juice - 30 days). Microhardness testing was performed prior to the erosive challenge to verify the standardization of samples. Immersion was performed 4x/day for five minutes, for either 7 or 30 days. After immersions were concluded, the brackets were bonded and shear bond strength was assessed after 48 hours. The Adhesive Remnant Index (ARI) was also assessed. Data were analyzed by two-way ANOVA, followed by Tukey's post-hoc and Student's t test for paired samples, and the Kruskal-Wallis non-parametric test (α = 5%). Results: The mean and standard deviation of microhardness testing of total samples were 281.89 ± 44.51 KHN. There was no statistically significant difference in shear bond strength for the time factor (7 or 30 days; F5.54= 0.105; p = 0.901). However, there was a statistically significant difference for the solution factor (F5.54= 6.671; p = 0.003). These differences occurred among solutions of Saliva x Coca-Cola™ (p = 0.003) and Coca-Cola™ x Lime Juice (p= 0.029). The assessment of the Adhesive Remnant Index showed no significant difference between groups. Conclusions: The immersion time used in the erosion protocols did not affect the bond strength of brackets to teeth. Coca-Cola™ induced significantly higher shear bond strength values than lime juice and artificial saliva. However, the short term effects of 7/30 days in this in vitro study may not be extrapolated for in vivo ones. Clinical studies should be conducted, substantiating the laboratory results.

Resumo Objetivo: avaliar o efeito de curto prazo de dois protocolos de desafio erosivo, in vitro, na resistência adesiva de braquetes ortodônticos metálicos em esmalte bovino. Métodos: Sessenta incisivos bovinos foram selecionados e divididos aleatoriamente em seis grupos: SA7 (saliva artificial - 7 dias, Grupo Controle); CC7 (Coca-Cola® - 7 dias); SL7 (suco de limão - 7 dias); SA30 (saliva artificial - 30 dias, Grupo Controle); CC30 (Coca-Cola® - 30 dias); SL30 (suco de limão - 30 dias). Foi realizado o teste de microdureza antes do desafio erosivo, para verificar a padronização das amostras. A imersão foi realizada quatro vezes ao dia, por cinco minutos, durante 7 ou 30 dias. Finalizadas as imersões, os braquetes foram colados e, após 48 horas, foi avaliada a resistência ao cisalhamento. O Índice de Adesivo Remanescente (IAR) também foi avaliado. Para análise dos dados, foram utilizados os testes ANOVA dois fatores, seguido do post-hoc de Tukey e teste t de Student para amostras pareadas, e o teste não-paramétrico de Kruskal-Wallis (α?#8197;= 5%). Resultados: a média e o desvio-padrão do teste de microdureza das amostras totais foi igual a 281,89 ± 44,51 KHN. Não houve diferença estatisticamente significativa na resistência ao cisalhamento para o fator tempo (7 ou 30 dias; F5,54= 0,105; p= 0,901). Contudo, houve diferença estatisticamente significativa para o fator solução (F5,54=6,671; p= 0,003). Essas diferenças ocorreram entre as soluções de Saliva x Coca-Cola® (p= 0,003) e Coca-Cola® x suco de limão (p= 0,029). Ao avaliar o Índice de Adesivo Remanescente, não foi possível verificar diferença significativa entre os grupos. Conclusões: o tempo de imersão utilizado nos protocolos de erosão não afetou a resistência de união dos braquetes aos dentes. A Coca-Cola® induziu valores de resistência ao cisalhamento significativamente mais altos do que o suco de limão e a saliva artificial. No entanto, os efeitos em curto prazo de 7 e 30 dias, nesse estudo in vitro, não podem ser extrapolados para os estudos in vivo. Estudos clínicos devem ser conduzidos, fundamentando os resultados laboratoriais.

Assessment of Candida SPP. proliferation in occlusal and palatal splints / Avaliação da proliferação Candida SPP. em placas oclusais e palatais

Candida species inhabit the oral cavity of all individuals who wear complete denture and whose material is the same as that used in splints. Assess the growth of C. albicans in occlusal and palatal splints used for treatment of TMD so that the potential risks of oral microbiota can be assessed. The growth of Candida spp. was assessed in the saliva of 27 individuals wearing splints for treatment of TMD. They were divided into two groups: G1 (n = 14), individuals wearing occlusal splint; and G2 (n = 13), individuals wearing palatal splint. Saliva samples were collected during placement of the splints (T1) and after 4 months (T2), being stored in PBS (10 mL) after 60-second rinses. It was observed that patients wearing occlusal splints (G1) had an increase of 0.648 CFU/mL (Log 10), with statistically significant differences (P = 0.043) for C. albicans (42.33%), C. glabrata (5.52%), C. krusei (41.72%) and C. tropicalis (10.43%). In the group of patients wearing palatal splints (G2), there was a decrease of 0.101 CFU/mL (Log 10), was observed with (P = 0.964) only the presence of C. albicans. The results suggest that growth of Candida species was greater in patients wearing occlusal splints compared to those wearing palatal ones as the presence of different yeast species was found in the former.

Espécies de Candida habitam a cavidade oral de 60-100% de indivíduos usuários de prótese total, cujo material é o mesmo utilizado em placas miorrelaxante. Avaliar o crescimento de C. albicans. em placas relaxantes musculares oclusais e palatais, usadas para o tratamento de DTM, na intenção de verificar riscos em potencial à microbiota bucal. Avaliou-se o crescimento de Candida spp. na saliva de 27 indivíduos, usuários de placa miorrelaxante, em tratamento para DTM no ICT-UNESP. Os indivíduos foram divididos em dois grupos: G1(n=14) ­ placa com recobrimento oclusal; e G2 (n=13) ­ sem recobrimento. As coletas foram com PBS (10mL), em bochechos por 60seg, na instalação das placas (T1) e após 4 meses (T2). Observou-se que pacientes usuários da placa miorrelaxante com recobrimento oclusal (grupo G1) apresentaram aumento de 0,648 UFC/mL (Log10) com diferença estatisticamente significante (p=0,043) analisando-se 42,33% C. albicans, 5,52% C. glabrata, 41,72% C. krusei e 10,43% C. tropicalis. No grupo de pacientes que utilizaram a placa sem recobrimento (grupo G2), observou-se diminuição de 0,101 UFC/mL (Log10) com (p=0,954) apresentando apenas C. albicans. Os resultados sugerem que os pacientes que fizeram uso de placa miorrelaxante com recobrimento oclusal apresentaram maior crescimento de Candida spp. em relação aos usuários de placa sem recobrimento, verificando-se a presença de diferentes espécies da levedura.

Evaluation of TMD signs and symptoms in individuals undergoing orthodontic treatment / Avaliação de sinais e sintomas de DTM em Indivíduos em tratamento ortodôntico

Objetivo: verificar a presença de sinais e sintomas de DTM em indivíduos em tratamento ortodôntico. Material e Métodos: foram avaliados 28 indivíduos que estavam em tratamento ortodôntico na clínica de uma faculdade do estado de São Paulo. Para identificar a presença de DTM foi utilizado o Research Diagnostic Criteria for Temporomandibular Disorders (RDC-TMD). A dor foi avaliada pela Escala Visual Analógica (EVA). A amplitude, dor e ruído durante os movimentos mandibulares, além da dor à palpação de músculos intra e extra orais e cervicais foram aferidos pelo Índice Craniomandibular (ICM). O limiar de dor à pressão foi avaliado por meio de algômetro. Os valores médios e desvio padrão foram obtidos e a análise foi expressa em porcentagem. Resultados: o RDC-TMD demonstrou que a maioria dos indivíduos não apresentaram DTM, que 3,57% apresentaram osteoartrite, 10,71% artralgia, 3,57% deslocamento de disco sem redução, 7% dor miofascial e 14,28% dor miofascial com limitação de abertura; A EVA evidenciou dor média de 1,37 cm (DP=1,4). A média do ICM foi de 0,26 (DP=0,14).O limiar de dor à pressão aferido com algômetro foi de 3,7 (DP=1,7) para o m. temporal anterior e de 3,00 (DP=1,2) para o feixe superficial do m. masseter inferior. Conclusão: foram observados sinais e sintomas de DTM em 39,13% dos indivíduos em tratamento ortodôntico.

Objective: To verify the presence of TMD signs and symptoms in patients undergoing orthodontic treatment. Material and methods: 28 individuals undergoing orthodontic treatment at the university clinics were selected. To assess TMD, the Research Diagnostic Criteria for Temporomandibular Disorders (RDC-TMD) was used. Pain was assessed by Visual Analogue Scale (VAS). The amplitude, sound, and pain during jaw movements, as well as pain on palpation of intra- and extraoral muscles were assessed by craniomandibular index (CMI). The pain to pressure threshold was evaluated byalgometer. Mean values and standard deviation were obtained and the analysis was expressed in percentage. Results: RDC-TMD demonstrated thatmost of the individuals did not have TMD; 3.57% presented osteoarthritis, 10.71% arthralgia, 3.57% disc displacement without reduction, 7% myofascial pain, and 14.28% myofascial pain with opening limitation. The VAS evidenced average pain of 1.37 cm (SD=1.4). CMI average was 0.26 (SD =0.14). The pain to pressure threshold measured with algometer was 3.7 (SD = 1.7) for the anterior temporal and 3.00 (SD = 1.2) for superficial masseter. Conclusion: It was observed TMD signs and symptoms in 39.13% of the individuals undergoing orthodontic treatment.

Aspects affecting the choice for scientific journal publishing / Aspectos que influenciam na escolha do periódico para publicação científica

This study aimed to evaluate the social and academic aspects and factors related to scientific journal that influence and motivate the authors to choose the journal to publish their academic work. Material and Methods: The study was conducted with professors and graduate students of the Institute of Science and Technology of Sao Jose dos Campos, UNESP. Participants responded to an online questionnaire, sentvia email, and the data were tabulated and analyzed. Result: The Thomson Reuters impact factor, followed by Qualis CAPES Index were considered of greater importance at the moment of choosing the journal for 56% of respondents. All respondents considered peer review relevant and 89% pointed out double-blind review as the most important aspect. Indexing and the journal’s quality were considered the most significant factors by most respondents. 98% of respondents have knowledge on both open access journals and Digital Object Identifier (DOI). Conclusion: The assessed academic community demonstrated good knowledgeon the factors inherent to the publication of scientific papers. Impact factor, indexing, and journal’s quality influenced on scientific journal publishing...

O objetivo deste trabalho foi avaliar aspectos sociais e acadêmicos e fatores relacionados a revista cientifica que influenciam e motivam os autores na escolha do periódico para publicação de seus trabalhos acadêmicos. Material e Métodos: O estudo foi realizado com docentes e pós-graduandos do Instituto de Ciência e Tecnologia de São José dos Campos, UNESP. Os participantes responderam a um questionário online, enviado via e-mail, e os dados coletados foram tabulados e analisados. Resultados: O fator de impacto Thomson Reuters, seguido pelo Índice Qualis CAPES foram considerados os de maior importância no momento da escolha da revista para 56% dos entrevistados.Todos consideram relevante a revisão por pares e 89% assinalaram a revisão duplo-cego como a mais importante. A indexação e o conceito da revista foram considerados os fatores mais significativos pela maioria dos respondentes. 98% dos participantes responderam ter conhecimento sobre as revistas de acesso aberto e sobre o DOI (Digital Object Identifier). Conclusão: A comunidade acadêmica avaliada demonstrou ter bons conhecimentos sobre os fatores inerentes a publicação de trabalhos científicos. Fator de impacto, indexação e conceito da revista influenciam os autores no momento de escolher o periódico para publicação de artigos...

The correlation between malocclusions and morphofunctional aspects: analysis of patients aged from 7 to 12 years old / Correlação entre má oclusão e aspectos morfofuncionais: análise de pacientes com idade entre 7 e 12 anos

Objetivo: Identificar as maloclusões de acordo com a classificação de Angle, a sobremordida e sobressaliência médias, e estabeler uma correlação com o tipo de respiração e deglutição. Material e método: As documentações de 432 pacientes de um Instituto de Ensino Superior do Estado de São Paulo foram avaliadas para identificar a classificaçãoo da maloclusão, a quantidade de sobremordida e sobressaliência e o tipo de deglutição (típica/atípica) e respiração (nasal, bucal ou mista). Os indivíduos tinham entre 7 e 12 anos (204 do sexo feminino; 228 do masculino). Os dados foram submetidos a testes paramétricos para dados quantitativos e qualitativos (ANOVA, Teste de Tukey e Quiquadrado) com nível de significância de 5%. Resultados: A maioria dos indivíduos apresentava dentadura permanente (58,6%), seguido de mista. A maioria era Classe II de Angle (67,2%), seguido de I e III. no sentido vertical, 47% apresentou mordida profunda e 7,2% mordida aberta anterior. A sobremordida média foi de 3,08mm e a sobressaliência, 4,67mm. Observaramse 43,1% dos indivíduos com respiração bucal; 78,7% com deglutição atípica, 21,3% normal; 23,6% utilizavam chupeta, 7,9% dedo e 13% mamadeira. Houve prevalência estatisticamente significante de Classe III, correlacionada com mordida cruzada anterior e posterior bilateral; de Classe II com mordida profunda; Classe I com mordida profunda e deglutição atípica. Observou-se correlação entre deglutição atípica, sucção de chupeta e respiração bucal (p<0,001). Conclusão: Foi observada importante correlação entre os tipos de maloclusão e os aspectos morfofuncionais, indicando necessidade de intervenção no tempo apropriado

Objective: To identify the malocclusion prevalence according to Angle’s classification, the mean of overjet and overbite and correlate them with the respiration and swallowing types. Material and Methods: The dental records of 432 patients from an Educational Institute in the State of São Paulo, Brazil were assessed in order to find the malocclusion classification, the amount of overjet and overbite, and the swallowing (normal/atypical) and respiration (nasal, bucal or mixed) types. The patients were aged between 7 and 12 years old (228 males and 204 females). The data were submitted to parametric statistical tests for quantitative and qualitative analysis (ANOVA, Tukey test and Chi-square) at significance level of 5%. Results: Most of the patients had permanent dentition (58.6%), followed by mixed dentition. Angle’s Class II malocclusion was the most prevalent (67.2%), followed by Class I and III. Overbite and anterior open bite represented, respectively, 47% and 7.2% of the vertical discrepancies. The average overbite was 3.08mm, while the average overjet was 4.67mm. Approximately 43,1% of the sample presented mouth breathing. Atypical swallowing reached 78.7% of the patients. Statistically significant correlations were observed associating Angle’s Class III malocclusion with anterior crossbite and bilateral posterior crossbite; as well as between Angle’s Class II with overbite, and Angle’s Class I with overbite and atypical swallowing. A correlation was observed between atypical swallowing; the use of pacifiers; and predominant mouth breathing (p<0.001). Conclusion: An important correlation was found between the type of malocclusions and the morphofunctional aspects, indicating the need for intervention at proper time.

Load-Application Devices: A Comparative Strain Gauge Analysis

In view of the low loading values commonly employed in dentistry, a load-application device (LAD) was developed as option to the universal testing machine (UTM), using strain gauge analysis. The aim of this study was to develop a load-application device (LAD) and compare the LAD with the UTM apparatus under axial and non-axial loads. An external hexagonal implant was inserted into a polyurethane block and one EsthetiCone abutment was connected to the implant. A plastic prosthetic cylinder was screwed onto the abutment and a conical pattern crown was fabricated using acrylic resin. An impression was made and ten identical standard acrylic resin patterns were obtained from the crown impression, which were cast in nickel-chromium alloy (n=10). Four strain gauges were bonded diametrically around the implant. The specimens were subjected to central (C) and lateral (L) axial loads of 30 kgf, on both devices: G1: LAD/C; G2: LAD/L; G3: UTM/C; G4: UTM/L. The data (με) were statistically analyzed by repeated measures ANOVA and Tukey's test (p<0.05). No statistically significant difference was found between the UTM and LAD devices, regardless of the type of load. It was concluded that the LAD is a reliable alternative, which induces microstrains to implants similar to those obtained with the UTM.

Considerando os valores relativamente pequenos utilizados em odontologia para os ensaios de carregamento verticais axiais, foi desenvolvido um dispositivo de aplicação de carga (DAC) para substituir a máquina de ensaios universal (EMIC). O objetivo deste estudo foi desenvolver um DAC e compará-lo com a EMIC por meio da utilização de carregamentos axiais e não-axiais. Num bloco de poliuretano foi inserido um implante hexágono externo, o qual foi conectado a um pilar protético esteticone. Sobre o pilar protético foi parafusada uma coifa plástica e um pilar cônico foi modelado em resina acrílica, que foi moldada para a obtenção de dez enceramentos iguais que foram fundidos em níquel cromo. Quatro extensômetros foram diametralmente colados ao redor do implante. Cada corpo de prova foi submetido a cargas axiais central (C) e lateral (L) de 30 kgf, em ambos os dispositivos: G1) DAC/C; G2) DAC/L; G3) EMIC/C; G4) EMIC/L. Os dados (µε) foram analisados estatisticamente pelos testes de ANOVA para medidas repetidas e de Tukey (p<0,05). Não houve diferença estatisticamente significante entre os dispositivos DAC e EMIC, independente do tipo de carga. A aplicação de carga não-axial (NA) determinou um aumento significante de tensões ao redor do implante. Foi concluído que o DAC é uma opção confiável, a qual induz microtensão em implantes de forma semelhante à EMIC.